|
The galleries below are currently available to members. To become a member click HERE. |
|
 |
|
|
AS OF THURSDAY DECEMBER 5, 2024
608 GALLERIES
27,115 IMAGES
958 VIDEOS
|
|
|
|
|
|
|
|
SELF BONDAGE ELECTROMAGNETS PART-5 GALLERY: 1223 / DATE: May 31 2021 / IMAGES: 28 / VIDEOS: 1 |  |  |  |
|
I'm losing track of how many videos I've posted about this self-bondage electromagnet bondage chair, but here's another. I have many ideas about using electromagnets for bondage, so stay tuned for more videos on the subject.
The video in this update features a self-bondage chair made by our friend Louis. Earlier versions of this chair were shown in Louis' home workshop. Louis eventually lost interest in the chair and passed it along to Bind and I. We replaced the cushions, gave it a paint job, and reworked the electrical timers. I must say, in the beginning Bind wasn't all that interested in the chair, but after we cleaned it up he seems to be very excited about it. When I reworked the timers, I installed a pair of 60-minute timers because that's all I had at the time. But, 60 minutes isn't a long enough time for most of us, so during my last visit to Bind's jail I replaced them with 12-hour timers. For me, 4 hours is about as long I can stay in bondage, so the new 12 hour timers will cover that.
The first scene in this video shows Bind in the chair with the older 60-minute timers. I must say, Bind looked really hot in the chair, especially with the steel helmet suspended from overhead. Once Bind was fully restrained in the chair, I set the timer on my phone for 50 minutes. We setup a two-way baby monitor so we could hear Bind, then we left the room and went upstairs.
Bind is the kind of guy who likes bondage teasing. Once he's locked up, he loves for people to add more bondage or time to his predicament. So, when the timer on my phone was up, we went back down to the basement and spun the timer to a full hour again. Haha! We did this two or three times just to frustrate Bind, and he loved every minute of it.
Next, it was my turn to try the chair. I would have worn my StudioGum heavy rubber suit, but the rubber around the wrists is too thick and as a result the stocks on the chair can't be fully closed and locked. So, I used my old sweats, leather boots, rubber ball mitts and a thick rubber hood, both from BlackStyle.
One problem with Bind's playroom is that it's too hot or too cold, so I always need to be prepared with sweats. I can either wear the sweats by themselves, or wear full rubber, or wear full rubber and the sweats on top. This allows me to enjoy long-term bondage in a variety of different temperatures. In this case we had a small electric heather going in the room 24x7 so the temperature was tolerable in my sweats.
I had a heavy metal collar locked around my neck which was connected to an overhead steel 'X' and then to the ceiling joists. This combination of gear was very exciting to me, and, as I'm reviewing the video and writing this text I had to stop and jerk off. I was fantasizing about being left in the chair overnight, and that the door to the room was also on a timer so that nobody could enter the room until morning. As a result, I was left in this bondage predicament overnight, not knowing when morning would come and the time would be up. How hot is that?
I hope you enjoy the visuals in this video. A special thanks to our friend Louis for building the chair, as well as loaning it to us. All the time and energy he put into the chair is bringing enjoyment to us all! |
|
 |
|
|
|
HOT HARD HAT AND FRIENDS - PART 1 AND 2 GALLERY: 1226 / DATE: May 20 2021 / IMAGES: 92 / VIDEOS: 2 |  |  |  |
|
Corona Virus Update - My friends and I have all been vaccinated, so I decided to do a short trip to NoEscapeDungeon in Las Vegas, MenInChains in Hampton Iowa, and HotHardHat in New Jersey. My airplane flights were full, with everyone wearing masks. The friends I visited on this trip would only hang out with people who have been vaccinated, so I felt safe. As a result, I feel comfortable enough to start shooting videos again. And, once Europe opens up, I'll be traveling to Germany to shoot with my rubber and bondage friends. So get your vaccination, continue to wear your mask, and stay tuned for new videos this year!
This update features a cute video shot while visiting HotHardHat in New Jersey last week. He invited me to attend a private 'bondage fest' he was having at his house. The fest was a celebration of the vaccine and the ability to get together after a year of lockdown.
Although there was only five of us, we spent a few days playing, talking, eating, and enjoying some adult beverages. The first scene of the bondage fest was conducted by our friend Wired4Fun, who mummified two of the guys in colorful vet wrap. If you are unfamiliar with vet wrap mummification, this is a great video to get the details on vet wrap and how to wrap your submissive safely. Although the wrap in this video is fairly lite, it can be made heavier by adding more layers. It's clear that Wired4Fun has done this colorful mummification many times before and has some great information which he shares with us during the process. Naturally, fun was had by all.
Our host was HotHardHat on FetLife and Recon. He loves heavy rubber, hazmat suits, gas masks, multiple layer cocooning, and being stuck in hot and sweaty bondage. He's appeared in videos on this website and MenInChains. HotHardHat introduced me to the ultra-heavy 4mm rubber suits from MD Latex. He also owns an awesome isolation box which he keeps in his basement, which we will see in upcoming parts of this video. A special thanks to HotHardHat and his guests for the camaraderie and bondage play, as well as being in this video. Enjoy! |
|
|
|
|
|
BONDAGE TABLE BY BDG SALES GALLERY: 1188 / DATE: May 9 2021 / IMAGES: 29 / VIDEOS: 2 |  |  |  |
|
Okay you guys. I am starting to travel again, and things are starting to open up. I got my two Pfizer shots, and I am on a trip that includes my friends at NoEscapeDungeon in Las Vegas, Bind at MenInChains in Hampton Iowa, and HotHardHat (on FetLife) in New Jersey. I'm flying on United and the flights are full. So get your shots, continue to wear your mask, and we'll be doing great by the end of this year.
This is a fun video we shot at Edge Dungeon a few years ago. As I may have mentioned, California has had a slew of fires because of drought and as a result the Edge Dungeon almost burnt down last year. The fire burnt three houses and the trees and shrubs around the jail, but it did not catch the jail on fire. There is a security camera system at the jail with cameras in each cell and a camera on the parking outside. The system captured one of the houses burning down along with the surrounding trees, and you could see red hot embers swirling around in the wind that the forest fire generated, but luckily, for some reason, the jail survived. I had imagined the jail burning to the ground, and all that was left were the cement jail cells, the steel jail bar doors, and the heavy steel Dungeon Bed. This would have been a very striking photo which would have been on the front page of all the newspapers. The caption would have read something like "private residential jail exposed during California wildfires". Can you see this on the front page of the New York Times? Lol!
Anyway, this video features a bondage table that was made by BDG Sales. This business was run by Dick and Tony, and was located in a small town in Pennsylvania. Their business sold all kinds of e-stim and bondage gear, some of which they manufactured themselves including the bondage table used in this video. Unfortunately, both Dick and Tony passed away a few years apart from each other, and their business is no longer operational. I was fortunate enough to shoot some videos of them a few years before they passed which I will post on this website in the future. Dick and Tony owned two versions of the famous Academy Chairs which I also captured in the video.
The video in this update features Bind, StrapWizard, DungeonDaddy and Dart_Tech. The BDG Sales bondage table is still at the EdgeDungeon, however the Dungeon is still closed as the owner clears the burnt houses and land around the jail. It will re- open again in a few years after some of the houses are rebuilt. Meanwhile, enjoy this video and be glad the Dungeon survived! |
|
|
|
|
|
STUDIO GUM VISIT - VIENNA AUSTRIA 2007 GALLERY: 1210 / DATE: May 2 2021 / IMAGES: 88 |  |  |  |
|
This update, which contains still photos only, is a rare look into Johannes Moller, the original owner of StudioGum in Vienna Austria. StudioGum has been the leader in creating heavy rubber suits and hoods, and although there's a growing number of heavy rubber suppliers on the Internet, StudioGum remains the gold standard. I was fortunate to have visited Johannes and his workshop in 2007 when I was traveling with my German friends Pupett and Matthias from Pupett.com. At the time, the Pupett website was quite popular with heterosexual fetishists worldwide. The website featured all the latest fetish gear including rubber, bondage and chastity. So, naturally my Pupett friends had close relationships with all the popular fetish manufactures in Europe including StudioGum. As a result, they provided me the opportunity to meet Johannes and take these photos.
Johannes was a private guy and didn't want to show his face in photos. Also, he spoke German, so our communication was limited to the translation provided by my Pupett friends. His workshop was in the basement of an old building on a side street in Vienna. The thrill for me was being in Vienna and experiencing the history and mystique of European fetish. For the western world, fetish interests were first enacted, nurtured and developed in Europe. I'm no historian, but in my lifetime, I have seen many European businesses evolve and nurture the collective fetishists of today. Such businesses include the AtomAge rubber magazine, Jim Stewart and his Fetters bondage business, Secret magazine, Little Shoe Box custom fetish footwear. These businesses are born and thrive, bringing new gear and ideas to the world-wide community, then they disappear, and a new fetish business rises up to take its place. As a side note, China is starting to manufacture basic rubber and bondage gear, and in 20 years they will have refined their products, developed new ones, and come out of the closet to express their own unique fetish interests.
Johannes StudioGum workshop was rather sparse. This is because the main part of his heavy rubber manufacturing was in the back of the shop behind closed doors. This is the same for all rubber businesses. The actual creation of flat rubber sheeting and heavy rubber hoods is a secret process. All latex rubber comes as a liquid in big heavy 55-gallon barrels. It's up to the business to add their own brew of secret chemicals to the liquid latex to adjust its texture and color. Then the liquid latex is poured onto large flat surfaces where it dries and becomes flat sheets of latex. This is an extremely expensive, space consuming, messy and tricky process. Every business that manufactures its own latex sheeting goes out of its way to protect its proprietary processes, including StudioGum's owner Johannes. In addition, very few rubber manufactures specialize in molded rubber hoods. The process requires using various size models of mannequin human heads which are dipped into the liquid latex, then dried and dipped again and again until achieving the required thickness. This is a time-taking process that can't be rushed and requires a lot of experience to prevent the rubber from running, dripping and drying unevenly. Once the rubber reaches the desired thickness and is completely dry, the rubber hood is carefully peeled off the mannequin head and cut for the addition of zippers, eye holes, etc. So, Johannes wouldn't show us his secret back room where all the magic happens. However, he asked me through translation if I would like to see his gasmask collection. My Pupett friends and I all said yes. We had no idea what we were about to see.
Johannes led us out the back door of his workshop and into the back alley. Europeans are familiar with the age of their buildings but walking through the back allies of centauries’ old buildings oozing with history of WW-II and before was really striking to me. We entered the back door of another old building, walked down the hallway and stopped in front of a locked door. I think this was an apartment building and the door we were facing was the entrance to a ground floor unit. Johannes unlocked the door and we entered what I can only describe as a gasmask museum. As you will see in the photos, there were literally hundreds of gasmasks covering the walls. There were three rooms filled with gasmasks and associated paraphernalia, diagrams, breathing filters, rubber hoses. There were gasmasks for children and horses from WW-I, and high-tech gasmasks for jet pilots.
As Johannes showed us around his museum, he spoke German to my friends, explaining the history of the gasmasks and where he got them. I could tell that he was quite proud of his unique accomplishment. Indeed, our minds were totally blown. Then it occurred to me - this guy had probably been attracted to rubber and gasmasks since he was a kid and experienced WW-II. It takes a special person with a personal fetish drive to create a business like StudioGum. Who else would dream up the bizarre heavy rubber hoods and suits he creates? As my friend JG-Leathers would say "horniness is the mother of invention". This is so true, and Johannes is an excellent example.
Since my visit with Johannes in 2007, he sold the business to Hans-Peter, another rubber guy in Germany. The story of Hans-Peter and the purchase of StudioGum is told in the text description of the update titled 'Switzerland In December Part 25-26-27'. Johannes sold his business and retired but passed away a few years later. So Hans-Peter, the new owner, now carries the sacred knowledge of heavy rubber manufacturing, and carries the torch forward for all of us who enjoy wearing heavy rubber.
I hope you enjoy the vintage photos of Johannes' gasmask museum. I'm so glad I was able to photograph his collection before he passed away. I understand that nobody stepped forward to buy the collection, so the museum was dismantled and divided up between interested parties. These photos may be the only complete set that exist. NOTE - the photo viewing in the gallery is not very intuitive. There are 80 or so photos spread across three pages, so make sure you view all three pages to see all the photos. A special thanks to my friends Pupett and Matthias for this unique experience. Enjoy! |
|
|
|
|
|
SWITZERLAND IN DECEMBER - PART 25-26-27 GALLERY: 1225 / DATE: Apr 28 2021 / IMAGES: 68 / VIDEOS: 3 |  |  |  |
|
Okay you guys, this is a hot video. This is part 27, 28, 29 of the Switzerland In December videos which we shot in in December of 2019. We were worried that visiting Zurich Switzerland in December would be bad weather, but it was OK and there was no snow. We were visiting RubNGum, a heavy rubber guy who runs the BlackStore.com website. This guy is one of us - he has a giant rubber collection and loves to be tied up in his heavy rubber gear.
We spent two weeks visiting RubNGum and a few other guys in the area. I had no idea how much video we shot until we got home, and I started to edit the content. After this update, I still have a few more hours of content I haven't edited yet. In this update we feature Lukas Tyler and Dungeon Daddy as they play with a steel bondage chair made by StyleFetish. I love Lukas's smile after he's secured in the chair. He's so cute, and his big smile tells us that he loves to be made helpless in bondage. Lukas and Dungeon Daddy are in love, and it shows in the video. They are so cute as a couple and we look forward to their wedding after the Covid pandemic settles down. They have a play space in their house in Las Vegas called NoEscapeDungeon which I helped them build. It's stocked with Dungeon Daddy's gear, my gear, and a few other guys who donated gear to the project. I will be shooting videos in their playroom in the future, as soon as the Covid pandemic settles down.
This video also features our friend Hans-Peter who owns StudioGum in Germany. Over the years I gave seem Hans expand his business to include StudioGum which he purchased from the original owner a while back. Hans-Peter told me that his first exposure to rubber was a small ad for StudioGum in the back of a gun magazine. We're talking years before the Internet. I guess Hans sent for a catalog from StudioGum, and years later he owns the business. Before the purchase of StudioGum, Hans was already running his own rubber retail website Latex-Maske.com. So, he was used to running his own retail website and making rubber gear. Before Hans purchased StudioGum I was lucky to visit the StudioGum workshop and meet the original owner. I was traveling with my German friends who ran the popular heterosexual website Pupett.com. The StudioGum shop was in the basement of a building in Vienna Austria. The original owner of StudioGum didn't want to show his face in my photos, but he invited us to see his gas-mask collection. We followed him through a back alley and into an apartment building. On the ground floor, in the rear of the apartment building, was a lone apartment that probably wasn't very popular with renters but was the perfect location for the gas-mask collection. Upon opening the door to that apartment, we were presented my thousands of gasmasks which he had collected over the years. My friends and I were totally blown away. This gas-mask museum explained to me how this man became motivated to start manufacturing heavy rubber and open a business called StudioGum. He was a rubber kinkster who was probably exposed to gasmasks at an early age during World War 2. He and I had to communicate through our German friends who translated his German to English. This guy was an early rubber kinkster from a previous generation. As a matter of fact, I'll post another update with this update, that features the still photos I took of his mas-mask collection. This guy was a walking encyclopedia on gasmasks.
Hans-Peter, the current owner of StudioGum also has an interesting story to tell. The original owner of StudioGum eventually wanted to retire and sell his business. So he put the word out, and two people were interested, and one was Hans-Peter. These two guys showed up at the same time to meet the StudioGum guy. The competitor to Hans-Peter offered more money for the business, so the owner of StudioGum was going to sell the business to this guy. However, as they talked, the prospective buyer started to talk about the changes he was going to make to the business. The owner of StudioGum didn't like what he heard, so he sold the business to Hans-Peter. Unbelievable. What a story. Hans-Peter is a real rubber guy whereas the other guy was probably less interested in rubber and more interested in owning the business for prestige. What a story. Anyway, we should all be thankful that the business was sold to Hans-Peter. In the video in this update you will meet Hans-Peter and get a feel for him. I believe he quit his day job and is now running StudioGum and Latex-Maske full time. He's a lucky guy who turned his fetish into a thriving business. Way to go!
In the last part of this three-part video we get to see RubNGum in an inflatable StudioGum suit and strapped down in a bondage chair. This is the best part of this update, as far as I'm concerned. RubNGum is strapped into the chair and the suit is inflated. This is so hot. I wish I could have tried this instead of shooting the video. I once shot another guy, strapped into another bondage chair, years ago, and I always looked back on that and wished that I was the guy in the chair. And, here I am again, the one shooting the video instead of being inflated in the chair. Damn!
In any case, this update includes a 3-part video which features all the stuff I have mentioned above. I hope you enjoy this update as much as I do. I'll post the still photos I took in the original StudioGum's owner's gas-mask apartment museum in an update immediately following this update. I hope everything I wrote above makes sense, as it's 1am and I’m a little drunk. Enjoy! |
|
|
|
|
|
SELF BONDAGE ELECTROMAGNETS PART-4 GALLERY: 1222 / DATE: Apr 16 2021 / IMAGES: 21 / VIDEOS: 1 |  |  |  |
|
I guess 2021 is the year that I focus on building self-bondage gear with electromagnets. Frankly, self-bondage is very dangerous, and I don't recommend that anyone do it, but it's a great fantasy that I have thought about since I was a teenager. Last year my friend MummyEd purchased the two round electromagnets that we used in Part 1-3 in this series. Actually, MummyEd showed up at my house with one of the magnets which he had got on E-bay, and I immediately went online and purchased another so I had a pair to work with. I had known that round magnets were available, but I never had one in my hands, and never experimented with how powerful they could be. These E-bay magnets hold 150 pounds with 6 volts at around 1 amp. This opened up my hidden desires to build and experiment with self-bondage gear. The other factors that fuel my excitement are Bind's jail and basement where we can play with the magnets, and the bondage websites that Bind and I run which allow us to share our bondage interests with everyone. It's like all the self-bondage stars are in alignment.
The self-bondage chair in this video was built by our friend Louis who has also experimented with electromagnets. You can see videos of his electromagnet gear in two updates on this website titled 'Chair Test' and 'DYI Self Bondage'. (use the search window at the top-left of this page) Louis has a background in electronics and mechanics so it wasn't to difficult for him to create his gear. In any case, after his hurtle with building this chair he kinda lost interest in it, probably because it took too much effort to put himself into it. As a result, he loaned it to Bind and I. We cleaned it up, made some modifications, and as you will see in this video, Louis's chair is a really hot piece of gear. We salute Louis for his inventiveness with the chair, along with his generosity loaning it to us and letting us modify it a bit. The main modification we did was to replace Louis's lawn sprinkler timer with a pair of mechanical timers. These two mechanical timers are much easier to set and offer redundancy in case one timer fails.
As you will see in this video, the chair is a little complicated to get into. It requires clear thinking because there's is a sequence you must follow to get yourself in. Bind's suggestion of the metal head cage suspended from overhead is a great addition. I guess I'll stop talking now, and let you enjoy the video. We have a few other videos with the chair, so stay tuned for future updates. As far as I'm concerned, this chair is nothing less than fantastic and really stokes my self-bondage fantasies. Enjoy!
WARNING! Self-bondage is extremely dangerous. It's best to leave self-bondage as a fantasy. The dangers of self-bondage can't be anticipated, and you only discover the dangers once you're secured and helpless. This video is for entertainment purposes only. Do not use this video as an example or guide. Play safe. |
|
|
|
|
|
BORN TO BE A SLAVE GALLERY: 1221 / DATE: Apr 7 2021 / IMAGES: 35 / VIDEOS: 1 |  |  |  |
|
Covid-19 virus update - I got my second shot of the Pfizer vaccine, and the day after the shot I didn't feel so good. I felt like I was coming down with a cold, so I went to bed early. The next day I was fine. A lot of my friends said that they had a similar 24-hour experience. The vaccine rollout seems to be going well in the San Francisco area, and appears to be very efficient and well organized. I will continue to wear my mask, which is not a problem.
In my opinion, there are three reasons that make the video in this update highly unique. The first reason is that our friend Pup Havok's face tattoos and nose ring look quite striking, especially behind his unique steel muzzle. The second reason is that the steel shackles and collar he's wearing are welded on, so they cannot be removed. The third reason is that the conversation Bind has with Pup Havok about being a slave is extremely insightful and compelling. I consider these three reasons to be unusual and insightful nuggets which we don't capture on video that often.
Pup Havok is a friendly and pleasant guy, polite and well educated. He's acquainted with our friend Yossie and happened to be staying with Yossie when we first met him. Since Havok enjoys bondage, he was more than willing to be in our videos. As one thing always leads to another, we ended up at my house with Bind and Havok playing in the back room on my bondage frame.
Havok is clearly into bondage because he wears his steel shackles full time. Yep! Welded on, 24x7x365. His day job is primarily solo so he can wear his shackles full time. Havok also has a steel muzzle which he enjoys wearing as often as possible, which can be locked on. As you can see, his facial tattoos combined with his muzzle and shiny nose ring make for quite an unusual sight.
During their bondage play, Bind said he felt that some people were born to be a slave. The more Bind talked about it, the more I realized that Pup Havok was in this category. Why else would he have shackles welded on? Notice Havok's demeaner when Bind talks to him about this. In some way, Bind was also describing himself, and me, and many of us who love to be tied up. We feel most comfortable when we're restrained and locked up. This is why Bind says that he feels 'at home' when he's locked in a cage or jail cell.
Some people dabble with bondage and restraint. They spend bits of time in bondage as a novelty, but they don't crave it. Others prefer to spend longer times in bondage to satisfy their occasional urge, while others prefer to experience long periods of time - or even full time - in bondage with all their control given away. They crave the experience. So, on a scale of one to ten, with ten being caged, restrained, or jailed full time, I would say that Bind is a ten, Pup Havok is probably an eight, and I am probably a six. Interesting, eh? I don’t care to have my life be completely consumed with bondage, but I do crave it quite a bit. For me, it provides a break from my daily life experience, and frankly, I can’t do without it.
Towards the end of Bind and Havok’s play, Bind talks about being 'born to be a slave'. These comments are very insightful and something for all of us hard core bondage enthusiasts to think about. I hope you enjoy this video as much as I did. |
|
|
|
|
|
THE LAST BONDAGE SCENE GALLERY: 1211 / DATE: Mar 25 2021 / IMAGES: 33 / VIDEOS: 1 |  |  |  |
|
Hey guys, here's a covid-19 update. I got both shots of Pfizer. Yep, maybe traveling to Germany and Switzerland to shoot videos is a possibility later this year. Keep your fingers crossed.
This video features the last bondage scene we filmed in the basement of NoEscapeDungeon.com, owned by DungeonDaddy (Recon) in Las Vegas. A few days before we shot this video, we moved all of Daddy's bondage gear from the basement to the second floor where we split it up between two adjacent bedrooms. Both bedrooms will be used as playrooms. We made this move because Daddy wanted to move his DVD collection into the basement next to his home theater. So, we spent a week or so painting the two bedrooms, bolting Unistrut to the walls and ceiling, and schlepping tons of gear from the basement up the two flights of stairs. You will see the upstairs playrooms in future videos.
The last scene from the basement features SFDom, Lukas Tyler, and the famous RigidCuff V-Chair. We're fortunate that Lukas enjoys shooting bondage videos with us, and we enjoy his company and the comradery of getting together with him and his partner DungeonDaddy for weekends of bondage play.
You've probably seen the RigidCuff V-Chair in our other videos, but it never seems to lose its appeal. It was built by our German friend Martin. Martin is a self-proclaimed 'bondage engineer', devoting much of his free time shooting bondage videos and still images, and building bondage gear. Martin is a smart guy and knows a lot about metalworking. You can see all the gear he's made over the years by clicking HERE. Also, here's an article about Martin and his home-made CNC milling machine. He made the V-Chair from scratch with welded and machined aluminum. I haven't seen Martin for years, and nowadays I see his bondage gear recreated in China. It's safe to say that Martin's gear is now a collector's item.
In this video we see SFDom strapping a construction safety harness onto Lukas which is connected to the ceiling. The V-Chair is a little unsteady on the carpet and should really be bolted to the floor or a piece of plywood. So, the safety harness protects Lukas from tipping the chair over - and it looks hot too! Lukas's molded rubber gas mask hood is from Polymorphe from years ago. Lukas's hands are slipped inside two pairs of BlackStyle rubber ball mitts. These mitts are really great. It was my idea to slip a pair of large size mitts over a pair of medium mitts, which dramatically increases the feeling of helplessness. Lukas's gas mask is connected to a tall bubbler bottle with an orange latex corrugated hose and screw-on gas mask fittings from StudioGum. The bubbler bottle is home made.
Once Lukas is fully secured, SFDom starts to apply his infamous hand job. SFDom is a great guy, and I love traveling and shooting videos with him. We make a great team, and when we get together with Lukas all three of us get fired up. I don't know how many guys SFDom has gotten off, but I bet it's over 200, maybe 300?
In any case, this is a fun and quick bondage video. The V-Chair is an awesome piece of gear, and I'm reminded to don my heavy rubber suit and get locked in for a few hours. Enjoy! |
|
|
|
|
|
BALL MOUNT BONDAGE GALLERY: 1209 / DATE: Mar 15 2021 / IMAGES: 25 / VIDEOS: 2 |  |  |  |
|
This is a hot scene we did in Las Vegas at NoEscapeDungeon.com. The guy in rubber is me. I wanted to try out the steel ball mount from Mr S. I'm not even sure that Mr S even sells them anymore. It's a metal device that mounts to the wall and has a round clamp that sticks out from the wall far enough to allow a guy to straddle the device with his back to the wall, and have his balls clamped in. Once clamped it, there is no way to escape. You are held against the wall by your balls and even with your hands free you can't get away. You are stuck. I thought this was a hot device and got the idea to mount the device to the floor. So, you're held to the floor by your balls. You can't really move because the ball clamp is quite rigid and stationary.
In this scene the ball clamp is mounted to a bondage platform which we built years ago. The bondage platform is nothing more than a sheet of 1-inch plywood covered with a piece of blue carpet. We used Unistrut around the outside of the platform for attaching ropes or chains. In this case I simply screwed the ball clamp down to the platform through the blue carpet. The ball clamp itself looks like a doughnut that's cut in half and hinged so it can open and close. A hex machine screw locks the clamp closed. The edges of the doughnut ball clamp are rounded to minimize pinching of the scrotum ball sack. The opening for the ball sack is fairly small, so you have to stretch out the scrotum skin to allow the clamp to fully close. Once closed, there is no way that either or both balls are going to slip through the opening, and there's no pain. Immediately you get a since that your balls are held stationary whereas the rest of your body can move around. This is an exciting and erotic feeling all by itself.
The first piece of rubber I put on was the StudioGum rubber hood with mouth insert, nose tubes and goggles. The more I play with this hood, the more I like it. The mouth insert completely fills my mouth with rubber and has the appearance from the outside that I have a rubber mouth and tongue. This looks and feels very kinky feeling. Then, I slip the pair of rubber nose tubes up my nose. This feels a bit uncomfortable the first few times, but I'm used to it now. When I first got the hood, I had to trim the length of the nose tubes by 1/2-inch or so. This is because the tubes were a length that made me sneeze uncontrollably. The tubes had to be cut shorter, so their ends didn't land in the sensitive sneeze zone in my nose. And let me tell you, it's difficult and scary to sneeze with this hood on, because you can't breathe through your mouth, you can only breathe through the nose tubes in your nose. Yikes! However, not to be deterred by this problem, you can order this hood with much longer nose tubes that end well past the sensitive sneeze area. I want to order a hood with the longer nose tubes because it makes the experience that much more kinky and exciting. By now I'm used to the shorter nose tubes and feel I can graduate to the next level of length. I get turned on just thinking about longer nose tubes!
After the hood is on, I don a heavy latex straitjacket suit from StudioGum. I have had this suit for years. In this scene I don't use the suit as a straitjacket, but instead slip each of my hands into rubber ball mitts from BlackStyle. These mitts are totally awesome, and not long after I purchased a pair of medium size mitts, I figured out that if I slipped a pair of large mitts over the medium mitts it became twice as restrictive. So, I ended up buying two pairs or the small, medium and large size mitts, 12 in total. This allows me to share these exciting mitts with other people I shoot videos with. In order to pull one mitt over another, both need to be well lubed or powdered. The feeling of two rubber mitts pulled over your hands is quite exciting and gives you a unique feeling of total helplessness.
Once I was fully enclosed in rubber, I climbed up onto the bondage table and SFDom assisted me in getting myself lined up with the ball clamp which was mounted in the center. SFDom used leather HumaneRestraint cuffs on my wrists and ankles to stretch me out in a secure spread eagle position with ball clamp positioned as close in my crotch as possible. I had planned on having a leather neck collar, but I aborted that idea because it would take SFDom longer to pull the hood off in case I had breathing problems. You see, lying horizontally with the hood is more challenging because saliva pools in my throat which I can choke on, and moisture can also gather my nose because of the nose tubes. So, I was nervous during this entire scene about choking. This doesn't happen when I'm standing or sitting vertical. In any case, once I was secured to the table with my balls in the clamp and my limbs spread and secured, and the hood filled my mouth with rubber, and I was breathing through rubber tubes up inside my nose, and I was peering out of lenses that are completely air tight and sucked to my face, I felt like this was turning into the ultimate rubber bondage experience. I felt so cocooned and helpless.
SFDom prodeeded to play with my erect cock with his gloved hands. These thick gloves feel amazing on my cock and balls, and feel even more amazing when lube is used to make the gloves slippery. The feeling on my cock and balls is out of this world! I was very turned on and it didn't take me long to shoot all over the place. It was a strong orgasm and it felt wonderful. I would love to do it again as soon as the virus lets us travel again. The next time I would like to be left bound to the table for a while before the cock play starts. This will allow me to fully enjoy this amazing 5-way helpless predicament! |
|
|
|
|
|
LAST STOP ON THE ROAD TRIP GALLERY: 1191 / DATE: Mar 2 2021 / IMAGES: 33 / VIDEOS: 2 |  |  |  |
|
Update - I got my first shot last week with the Pfizer vaccine. Yay! My second shot is due in three weeks or so. I'm glad to see the fairly rapid distribution of the vaccines. Hopefully by fall most people in the US will be vaccinated. Please don't pass up your opportunity to get your shots. It doesn't matter what vaccine you receive, just get it so we can stop the spread and devastating effects of the virus.
There are two videos in this update, shot at the EdgeDungeon in California. We were on a long road trip which included a strop in Las Vegas Nevada and Eureka, San Francisco and Santa Cruz California. These road trips are really fun because each stop includes unique jails dungeons and gear. As you know, Bind and I run bondage websites, each requiring updates on a regular basis. Bind and I consider ourselves lucky to have jobs which incorporate our favorite subject and hobby - bondage. Bind and I never thought we would be running businesses that would require us to buy bondage gear and be tied up in it in order to make a living. In addition, our jobs require us to meet other dungeon owners, gear manufacturers, bondage enthusiasts, and buy gear that turns us on. What a life we have.
The problem with shooting bondage videos is that we prefer to shoot real bondage scenes, gear and people, not use paid porn actors. Sometimes we must create a story in our videos to keep them interesting. Bondage is usually associated with holding someone immobile, so unless there's some action around the bondage the video can get a little boring.
So, in the first video we created a little story about a guard and prisoner. This short story allows us to show off the jail and solitary cells at EdgeDungeon, along with an awesome steel helmet we got from BlackStore.com. The helmet fits Bind perfectly, and the little story we created with the helmet in the solitary cell is REALLY HOT. I wish I had a similar helmet and could be chained up like Bind in this scene. This is the stuff that bondage fantasies are made of.
Along with Bind in the cells, we also show our friend NoEscapeSlave in shackles and being locked in a metal box for the night. He really enjoys this and has done it many times before in similar metal boxes.
The second video in this update is just a little discussion that Bind and I had before we left the EdgeDungeon. The EdgeDungeon was the last stop on our road trip before we split up and went our different directions. Bind has expressed interest in joining SFDom and I on our next trip to Switzerland and Germany. Hopefully we can make this trip towards the end of this year. The steel wrist and ankle cuffs used with the metal helmet are from Dungeon Delights. |
|
|
|
|
|
BLAKE IN A BOX GALLERY: 1215 / DATE: Feb 20 2021 / IMAGES: 25 / VIDEOS: 1 |  |  |  |
|
This is a fun video featuring Boy Blake in our fiberglass military box. We have had this box for years and occasionally someone expresses an interest in trying it out. Our friend MummyEd got this box on Craig's List and I drilled holes in the side and installed two pipes that allow gas mask hoses to be connected. Although this box is awesome for confinement scenes, the person inside the box will run out of breathable air unless they have a way to breathe fresh outside air. So, we had a gas mask that allowed two hoses to be attached for both inhale and exhale. The gas mask hoses are connected to the ports on the side of the box, which allow the person inside to inhale and exhale external air. Not only does this work well, but it keeps the breathing air separate from the air inside the box. If any exhale air is mixed inside the box, the inside of the box will become hot and moist rather quickly. Now that I'm thinking about it, I should drill two more holes in the box and add a fan that would circulate a small amount of air through the box to keep the inside cool.
In any case, we strapped Boy Blake in an orange straitjacket we got from the Straitjacket Shop on Etsy. This guy is in Poland and makes restraints out of cotton and other less severe and expensive materials than leather or canvas. If you purchase any gear from him, please mention that you got his website info from SeriousMaleBondage. He gave me the orange straitjacket in exchange for promoting his gear on this website, so any feedback you can give him about SeriousMaleBondage would help. Thank you!
So, we strapped the orange straitjacket on Blake and he immediately got a boner, so I guess it was working for him. We strapped the gas mask on his face, and he was ready to get into the box. He curled up in the box which had a leather cushion on the bottom. SFDom was surprised that he fit so easily. It turns out that a lot of people fit in the box. It's not so hard to curl up in a ball regardless of what size you are.
Once Blake was comfortable, we told him goodbye and lowered the top of the box. The box has 12 latches that hold the top and bottom of the box together. As you can see, once the latches are secured and locked the box is completely inescapable. So long as Blake feels that his breathing is un-obstructed and he's breathing fresh air, he's less likely to panic. This is where a small fan to force outside air through the box would be a good addition.
The box is sitting on top of a cart I built out of Unistrut. The original idea was to put someone in the box, then roll them into a local kinky coffee shop in San Francisco called Wicked Grounds. Unfortunately, we never got around to doing this, and now the box and cart are in Las Vegas where local authorities aren't as tolerant of such activities. As I recall, we did get a chance to put an infrared GoPro camera in the box and shoot some video of someone locked inside, but I forgot which video that was. Anyway, we all enjoyed locking Blake in the box, including Blake. Afterwards, I had to disassemble the cart because it took up too much space in NoEscapeSlave's Las Vegas garage. But, we should try the GoPro camera idea again in the future, once the covid-19 virus is under control and we can travel again. C'est la vie! |
|
|
|
|
|
SWITZERLAND IN DECEMBER - PART 23 AND 24 GALLERY: 1206 / DATE: Feb 9 2021 / IMAGES: 44 / VIDEOS: 2 |  |  |  |
|
Here's another cool video from our trip to Switzerland at the end of 2019. This video features a very heavy rubber sleepsack from BlackStore.com. I think I posted a similar video of this sleepsack, from our same trip, earlier on in this series. But in any case, it's a very cool sleepsack and it's worth showing again in this second video.
The sleepsack made of heavy rubber that I would say is around 3/16 inch thick. Some people in our group referred to the thickness as 4mm. Regardless of the gauge, you can see the thickness by looking at how the rubber folds and creases. In other recent videos we have shown rubber straitjackets made of the same gauge material. It's my belief that if the rubber gauge is much thicker it becomes unmanageable. I think it would no longer conform to the body. I'm not saying that we should avoid making gear out of a heavier gauge of rubber, I'm just not sure it would be practical. However, please let me know if you see any gear made of thicker rubber.
This video was shot in the studio of RubNGum which is located an hour of so outside of Zurich. RubNGum runs a retail website BlackStore.com where this sleepsack and the heavy rubber straitjackets can be purchased. In this video, SFDom and our friends zip and strap RubNGum in the sleepsack, and then using more straps to buckle him down to the padded table. The straps are made from the same heavy rubber as the sleepsack. Notice how RubNGum's arms are slipped into rubber sleeves inside the sleepsack. If you are unfamiliar with sleepsacks, they all have some kind of internal sleeves which hold your arms at your sides once the sleepsack is closed. These sleeves are very exciting because they don't allow you to use your hands or arms at all, and they keep your arms at your sides so there is absolutely no possibility of escape. I love this idea and whoever thought of this idea deserves a prize.
Come to think of it, the now-deceased creator of the popular UK bondage company Fetters might have come up with the internal sleeve idea. His name was Jim Stewart and he pioneered the idea of playing with bondage for fun and excitement. We own him a special thanks for helping bring bondage out of the shadows and into the mainstream. I met Jim Stewart in the mid 90's at the Mr S store here in San Francisco, along with the owner of the Mr S store Richard Hunter. You can read about the history of Jim Stewart on the Fetters website HERE, and read about Richard Hunter and the Mr S store HERE, HERE, and HERE.
While you watch this video, you will see that the straps around the sleepsack are locked with special Segufix magnet locking posts. These locks incorporate a stainless-steel post and locking cap. Once the cap is slipped over the end of the post, the cap can't be removed until a magnet key is put in the top of the cap. This kind of lock is used in combination with special hospital restraint straps European hospitals. Recently, Segufix produced a newer cap and magnet key that work much better than the original version. The old Segufix caps are black, and the new caps are green. If you ever decide to purchase Segufix locks make sure you buy the newer kind with the green caps. The black and green caps and their respective magnetic keys are not interchangeable.
RubNGum is wearing a thick StudioGum gas-mask hood, which matches the sleepsack quite well. RubNGum has an e-stim plug in his butt, and e-stim hooked around his cock. Both are connected to an Erostek 312 box. As you will see, RubNGum likes fairly intense electro-stimulation combined with inescapable fully-cocooned heavy rubber. I'm not really interested in electro play, but I do like heavy rubber!
SFDom has two rubber gimps as helpers. One is Lukas Tyler and the other is Michael or elegance_so_different in Instagram. Michael used to work for Rubbers Finest, and as a result has an amazing collection of rubber, including the strange rubber mask and hood he's wearing. He's quite an artist when it comes to owning highly unique rubber gear.
All in all, everyone had a good time playing with RubNGum, including when the bondage table was raised to a vertical position and RubNGum was left to suffer his rubber confinement while everyone went to lunch. Poor RubnGum! Actually, I'd like to be in his position right now!
|
|
|
|
|
|
SELF BONDAGE ELECTROMAGNETS PART-3 GALLERY: 1219 / DATE: Jan 30 2021 / IMAGES: 29 / VIDEOS: 5 |  |  |  |
|
For all the guys out there who like mechanical and electrical stuff, this update is for you. I'll admit that I'm a tech geek. I love gadgets and building electro-mechanical stuff. The video in this update is 2 1/2 hours and features a group of us talking about and playing with the big self-bondage electromagnets I built last year. If you're looking for hot bondage play this may not be the video for you. But if you like talking tech and being around guys who like messing with bondage gear and ideas then you may like this long video.
As I have said before, I love talking about serious bondage and playing with serious Bondage. I just turned 65 last year, and I am so excited that my life is now pretty much about bondage of one kind or another, full time, 24x7. I have fantasized, played, invented, built, investigated, and researched bondage gear my entire life, and met many bondage people around the world, with many more to meet. I guess you could say bondage has been my entire life. I have had regular jobs including motion picture projectionist, broadcast television post-production maintenance engineer, and my last job was streaming videos on corporate networks. I was laid off around 2001 and decided to try my hand at building and running a bondage website. I should have done this many years earlier, but the Internet wasn't around. In any case, I sure enjoy my life now, running bondage websites, traveling the world shooting bondage videos, and inventing and building bondage gear. A special thanks to everyone who has been a member of this website. Your membership supports my ability to document cool bondage gear and people, and share the videos with everyone around the world. I hope you enjoy this website as much as do running it.
One of my main inspirations has been knowing my friend Bind and seeing the energy and drive he put into his historic jail in Hampton Iowa. Bind is the real deal, pursuing his passion for bondage with vigor and inspiring me in the process. I wish I owned a jail and attached house where I could continue to run my websites, build bondage gear, and tie myself up every night. However, I'm in San Francisco, so I depend on hanging out with my friends who own jails and dungeons. My hat off to Bind, and between the two of us we seem to have a good time together and feel the sky's the limit with regard to bondage play.
In this video you will see us discussing and experimenting with my self-bondage electromagnets. A special thanks to SFDom for doing most of the shooting. It's just some guys playing with bondage the same way kids play with their toys. So much fun! The shackles used in this video are from our friend Rick at DungeonDelights.com.
WARNING! Self-bondage is extremely dangerous. It's best to leave self-bondage as a fantasy. The dangers of self-bondage can't be anticipated, and you only discover the dangers once you're secured and helpless. This video is for entertainment purposes only. Do not use this video as an example or guide. Play safe. |
|
|
|
|
|
|
|
|
|
|
BONDAGE CHAIR BY YOHAN555 GALLERY: 1220 / DATE: Jan 17 2021 / IMAGES: 4 / VIDEOS: 1 |  |  |  |
|
We acquired this short video from our friend Yohan555 in Germany. Yohan has become quite popular on Twitter (yohan555) and Recon (strjacket555) because he owns a unique selection of bondage gear which he built himself. Yohan has been attracted to bondage since he was 6 years old. As he grew up on his family's farm, he felt a special attraction to playing inside steel hog cages. This attraction was further stoked by a comic book that featured people in straitjackets. Yohan became hooked on bondage at an early age. He enjoyed the titillating feelings when fantasizing about being helpless, confined and restrained. His interest was specifically linked to gear designed for human control and captivity.
As many of us have experienced, since Yohan's early days on his family's farm, he has spent years of his life doing self-bondage while hesitant to share his kinky interests with others. However, as he grew older and more confident, along came the rise of the Internet and social media. Yohan began to make contact with others and share photos of the gear he built for self-bondage. As a result, Yohan has met many guys on-line who share his interest in serious bondage, and his photos have been widely distributed among bondage aficionados.
Currently, the inventory of gear which Yohan built include an isolation cell, jail cell, padded cell, padded box, padded coffin, bondage chair, and some more gear which I haven't even seen. Each piece of gear is designed for self-bondage with electro-magnets and timers. As JG-Leathers would say "horniness is the mother of invention". This is so true. The video in this update doesn't include self-bondage, but it's certainly an example of Yohan's serious bondage play.
This short video was shot with Yohan's cel phone and features his bondage chair, along with his play partner in a Top-To-Bottom hood and Maxcita straitjacket. Yohan is a switch, and said his favorite bondage scenario is in a straitjacket, with his legs strapped together and pulled up behind him like a hogtie, and then locked in his padded cell, never to be released. Yohan sounds like my kinda guy.
I've been communicating with Yohan for months now, and SFDom and I plan to visit him as soon as the corona virus is under control. Yohan promised he will send me a few more videos with the unique gear in his basement. We appreciate any video he can send us in lieu of visiting him in person. Thank you Yohan555!
WARNING - Self-bondage is extremely dangerous. It's best to leave self-bondage as a fantasy. The dangers of self-bondage can't be anticipated, and you only discover the dangers once you're secured and helpless. Please play safe. |
|
|
|
|
|
THE METAL MAN GALLERY: 1217 / DATE: Jan 12 2021 / IMAGES: 23 / VIDEOS: 3 |  |  |  |
|
SFDom and I filmed this video around March of 2020 as the virus pandemic was just ramping up, and since March we haven't shot any more videos. We just don't want to chance flying and being exposed to the virus. In any case, we shot some cool videos including this one at Bind's jail in Hampton Iowa.
This video is pretty much raw with little editing. It's a video showing just how much fun we have at Bind's place, goofing around each day with bondage. I never thought I would have the opportunity to play with as much bondage as I have in the last few years. I appreciate Bind's friendship and inviting SFDom and I to visit his jail and have as much fun as we do. We're like a bunch of kids, only we're playing with adult toys.
I was a little nervous going into the Metal Man, partly because there wasn't enough air flow around my face. But once we got a small fan circulating a bit of air in the helmet, I was good to go. As I have since suggested to Bind, we should weld together another helmet that has a rectangular opening so you can see outside, and get a mirror suspended overhead so I can see myself while in the Metal Man. I like the feeling inside the Metal Man, but I totally missed seeing the Metal Man from the outside, knowing that I'm locked inside. That would sure do it for me. I need the visual to turn me on. Another suggestion would have been to raise the head end of the Man up so my body was at more of an angle from the floor.
Our hats off to Bind and SoldierBoy for creating this ultra-cool metal sarcophagus. This is the stuff that Bondage fantasies are made of. Enjoy! |
|
|
|
|
|
HEAVY RUBBER BUBBLE BATH GALLERY: 1212 / DATE: Jan 2 2021 / IMAGES: 20 / VIDEOS: 1 |  |  |  |
|
Okay, I'll admit, this video was my idea. I love heavy rubber in bathtubs or swimming pools. Heavy rubber is so erotic and playing in water while wearing rubber is totally fun! Even being hosed down with a garden hose on a hot day in the back yard is great.
The bathtub in this video is in Las Vegas at the home of NoEscapeDungeon.com. This is a pretty big and fancy home, with three bathrooms. The bathroom for this video has glass bricks that allow the afternoon sunlight to pour into the bathtub so it's light and warm for rubber play.
Not only does heavy rubber feel good around your body, but it also feels REALLY GOOD on your cock. I'm not quite sure why, but it feels erotic and is bound to give you a boner. So, having your cock exposed to the outside while the rest of your body is enclosed in rubber, combined with having your cock played with by heavy rubber gloves, combined with warm and slippery soap bubbles, while viewing the entire experience through the goggles of a tight-fitting gas-mask, and breathing through rubberized inhale and exhale valves, is a fantastic experience!
I think that being enclosed in heavy rubber is like a child's desire to climb into a cardboard box or hide in a closet or small space. Maybe it has something to do with being surrounded, enclosed, protected and being safe. I think that many people who are attracted to SCUBA diving like wearing the dive suit and all the equipment. Maybe it's a way to let out your kinky desires without having to do it under cover from your friends and family? As a young teenager I bought a wetsuit, telling my parents I was going swimming with my friends in the San Francisco bay, but secretly I wanted to wear the suit and tie myself up. In addition, the suit was jet black with no name or logo printed on the outside, and I looked sexy when I wore it. Same goes for seeing other people in neoprene dive suits. It makes their bodies look sleek, erotic, smooth and sexy. And add the tight-fitting neoprene hood, gloves and booties takes the whole experience over the top. In my 30's, some 30 years ago, I was invited to participate in a kinky presentation at a swinger's event at a local hotel. The presentation was about alternative sexual interests, and I was the representative for the rubber lovers. So, I was dressed in heavy rubber from head to toe, and walked across the stage in my black rubber. I'm sure many people were amazed because rubber wasn't as popular as it is now. Anyway, after the event I went outside and in the courtyard was a swimming pool and hot tub which, and nobody was around because it was raining. I slipped into the hot tub as the rain poured down. It was such a fantastic experience; I couldn't believe it. I was cocooned in my heavy rubber while the rain poured down, warm and cozy in the hot water. The raindrops ran down my goggles, and the only part of my body exposed to the rainstorm was my head. I was in haven. It was sooo cool! I have been in swimming pools many times since in rubber, but that was the only time I was in a hot tub while it rained. Priceless! I hope you enjoy this video as much as we did shooting it. The heavy rubber suits in this video are from our friend Hans-Peter at StudioGum. |
|
|
|
|
|
PLAY TIME GALLERY: 603 / DATE: Dec 27 2020 / IMAGES: 27 / VIDEOS: 1 |  |  |  |
|
This is a hot video I found in the archives. It features our rubber friend Rank and his gimp who’s strapped down to a padded table. This video was shot 10 years ago when a San Francisco rubber group called RMSF was in full swing. RMSF stand for Rubber Men of San Francisco. Rank was one of the primary drivers of this group and organized lots of rubber classes and events for its members. The group eventually dissolved, and Rank moved away. However, during his rubber heyday we shot a lot of videos. You can find the videos by searching for the word 'rank' in the upper-left search window.
In this video, the gimp's heavy rubber hood and assortment of rebreather bags are from StudioGum, and his padded rubber mitts are from Mr S. Personally, I'm not a fan of breath play, but inhaling through an unrestricted rebreather bag provides the wearer a wonderful and heady aroma of natural rubber. In addition to the great smell, a heavy rubber hood with a rebreather bag looks very kinky and really turns me on!
Rank is a good looking guy, experienced SCUBA instructor, and a great rubber Top. As you will hear in the video, the Gimp says he's close to cumming, but Rank reduces the vibrator intensity and leaves the gimp to stew in his own juices. Nice!
This video is in the old Windows Media format. If you have problems playing this video, try installing the free VLC Media Player for Windows and Apple. Enjoy! |
|
|
|
|
|
SELF BONDAGE ELECTROMAGNETS PART-2 GALLERY: 1203 / DATE: Dec 24 2020 / IMAGES: 24 / VIDEOS: 1 |  |  |  |
|
Hey everyone, have a Merry Christmas! Please wear your masks and be safe. I hope this video will keep you guys hot and entertained during these strange times. Thank you so much for supporting my website. I turned 65 earlier this year, and although I'm doing ok, I can feel my self slowing down a bit and starting to have vision and hearing problems. I still love to shoot bondage videos, run my websites, and think up to bondage gear and scenarios. Thank you to all the guys who have appeared in my videos, and thank you to the guys who have opened their playrooms for us to shoot in. I have plenty of new locations to shoot in as soon as we can travel again.
If you ask me, the video in this update is a really hot. Like in Part-1, this video is about self-bondage with electro-magnets. I have played with as well as fantasized about self-bondage it since I was a kid. I have also had a few life-threatening close calls with self-bondage and no longer do it. However, I still fantasize about it, and jerk off to my fantasies.
I was recently inspired to build some self-bondage gear after receiving an assortment of round electro-magnets from my friend MummyEd. MymmyEd is always cruising Recon, FetLife, reading group chats and looking for interesting kink stuff on the Internet. He obtained two different sets of electro-magnets. The first set, which is featured in this video, were bigger and more powerful than the second set. The first set had a strength of 150 pounds. I was able to find short pieces of steel pipe and hardware to create two individual self-bondage magnets complete with heavy eye-bolts, industrial strength power cords, and a junction box which holds the power supply and timers.
The second set of magnets that MummyEd found were smaller in size and had 95 pounds of strength. He got them from the SelfBondageShop on Etsy.com. This shop is in Germany. So, I'm in the process of making a pair of spreader bars for the wrists and ankles that have the magnets at each end. Stay tuned for videos with the spreader bars.
In any case, this video features Bind putting himself in a hogtie with the first two magnets. Bind rigged up a suspended bar from overhead with the two magnets, allowing him to put himself in the hogtie even while he's shackled, gagged and blindfolded. This is exactly the kind of scenario I would fantasize about and jerk off to.
I love how raw, industrial, harsh and scary this scene looks with the heavy steel canisters and their heavy rubber cords hanging above Bind. For me, the center picture above says it all. I love strange and bizarre images like this. How would you like to be restrained like this, alone, with the timers set for 2 hours? To me, this is jerk-off material at its finest. Merry Christmas everyone, and thank you all for your continued support!
WARNING! Self-bondage is extremely dangerous. It's best to leave self-bondage as a fantasy. The dangers of self-bondage can't be anticipated, and you only discover the dangers once you're secured and helpless. This video is for entertainment purposes only. Do not use this video as an example or guide. Play safe. The steel wrist and ankle cuffs used in this video are from Dungeon Delights. |
|
|
|
|
|
HEAD BOX PUNISHMENT GALLERY: 1213 / DATE: Dec 18 2020 / IMAGES: 44 / VIDEOS: 1 |  |  |  |
|
This is a fun and sexy video we shot in Las Vegas earlier this year just as the virus was just starting to effect our movements. SFDom and I were visiting our friends DungeonDaddy and Lukas Tyler at NoEscapeDungeon.com. We were involved in a project to move all the dungeon gear from the basement to the second floor. Before SFDom and left for home we installed the transparent head box, mounting it to the ceiling. The head box is one of my favorite pieces of gear, and during the 8 years that I owned it before giving it to the Vegas dungeon it has hardly been used. The box is made of 8020 extruded aluminum, one-inch thick transparent plexiglass plates, and one-inch thick aluminum plates on the top and bottom. This is a serious box, and it weighs a ton. A friend of mine who worked in Silicon Valley had the pieces machined along with some other parts of play toys he built with 8020. It must have cost him an arm and leg. Eventually he lost interest in bondage play and sold me his gear.
In this video we had just finished hanging the head box from the ceiling and decided to give it a test with Lukas Tyler. Lukas is easy going and game for pretty much anything, so SFDom put his head in the box, slid the bottom aluminum plate closed around his neck, and installed the screws to hold the plate in position. The cool thing about this head box is that once your head is inside and all the screws are tightened, there's no way for you to escape even with your hands free. Unless you have a hex driver to loosen the screws you aren't getting out! This is pretty damn cool, but having your hands handcuffed behind your back like SFDom does in this video is even better.
As you have probably seen by now, Lukas and SFDom enjoy playing with each other. Lukas really likes bondage, so it's easy to talk him into being tied up in almost any piece of gear. Once SFDom has Lukas' head secured in the box, Lukas discovers that he can rotate his body around 360 degrees and can look out of all four sides of the transparent box. This turns out to be pretty hilarious as SFDom tries to torment Lukas with a vibrator.
Finally, SFDom replaces Lukas' handcuffs with a Maxcita canvas straitjacket. This really turns on Lukas, and SFDom edges him with a vibrator. The four windows of the head box begin to fog up with Lukas' heavy breathing, and Lukas's feet start to dance around on the floor as he gets more and more excited. Finally, Lukas asks for permission to cum but SFDom immediately takes away the vibrator and stops all of his stimulation. Lukas continues to thrust his cock helplessly in the air as he pleads with SFDom not to stop. However, regardless of Lukas' begging, SFDom reminds him about an earlier transgression and leaves him in the room to contemplate his error. Poor Lukas is left helplessly secured in the straitjacket with his head trapped in the heavy transparent box. If you ask me, this is an exciting bondage setup that I'd like to try it myself sometime. But poor Lukas, he was edged to the brink and then left in bondage with his hot juices running over and no relief. Enjoy! |
|
|
|
|
|
|
|
